At home daily, I need to mix my table salt + COLD tap water. As "Marine salts dissolve faster and more thoroughly when added to circulating water," I "use a powerhead to speed up mixing time — my Vitamix 7500 blender.

Speed 10, or even 9, feels like overkill for a solid as soluble as table salt! I shall avoid higher blender speeds, because the faster speeds shall strain my blender's motor! To lessen engine strain, I prefer to blend more slowly at a lower setting for a longer time, than blending more fastly at a higher setting for a shorter time.

1. How do I deduce which setting suffices for mixing table salt + COLD tap water?

2. Am I correct that blending at the lower setting (e.g. 1) for longer yields the same result as blending at a higher setting (e.g. 2) for shorter time?

Never add salt mix quickly or all at once, this will cause precipitation. Always add it slowly, one cup at a time. Also, be sure to add salt into the water and never water into the salt. In other words, fill the container 100% with water first, then add the appropriate amount of salt into the water. If you try to measure out the salt first, then fill it up with water, precipitation will occur.

posted about 1 year ago

CC BY-SA 4.0

1y ago

TextKit‭

-58 reputation 15 0 -45 27